New build – input/comments appreciated

[ngundtoft]

A small update to the dovetail jig. Since you can easily remove the vertical braces, I figured that you could just clamp thicker things directly to the base plate with clamps - same system as used in the Festool worktable (you can use the same clamps). If you are normally routing items that are not so wide, you can also have one of the vertical braces fixed tightly as a fence to ensure that the work items are perpendicular to the bed.

[hanermo2]

Yes, I agee on the costs.
Many of my choices would be different if I did not do things for commercial uses.
Haas has the lowest costs in the industry.

A servo amplifier (ie driver) (just electronics) costs 500€.
The same from yakawa or siemens costs 2500€.
The ones I use cost about 350 for the same size, circa 1kW.

Like I said, the MPG wheel is only 30 or 40.